Table of Contents
Advertisement
-gate: Assigned IP default gateway
-nat: Provide DHCP Server and NAT function.
-dhcp: Dynamic Host Configuration (1 = ON; 0 = OFF)
-dns: Setup DNS Server IP Address.
-sntp: Simple Network Time Protocol (0=No update, 1=Specify server IP,
2=broadcast mode). When SNTP function is activated, users have
to specify a SNTP server as network time source. An example is
demonstrated below while 10.1.1.1 stands for SNTP server's IP
address:
usr/config$ ifaddr -sntp 1 10.1.1.1
-autodns: Auto or manual configures the DNS IP address when gateway device is
under DHCP and PPPoE mode.
-timezone: set local time zone according to GMT
-ipsharing: To enable or disable IP sharing function. When this function is enabled,
user must specify a public fixed IP address.
usr/config$ ifaddr -ipsharing 1 210.11.22.33
Note:
If the public IP address is not a fixed one, the gateway cannot work behind NAT with
peer-to-peer mode.
-server: set EMS server IP address. EMS is software to help user can easily
configure products. Please contact with your reseller for more information.
-id: specify EMS ID to login EMS Server.
-pwd: specify EMS password to login EMS Server.
-emstime: specify EMS cycle time.
For example:
usr/config$ ifaddr -print
Internet address information
WAN IP address
Subnet mask
Default gateway
NAT enabled
DHCP startup
KVB-311 Broadband VoIP Router User Manual
: 192.168.13.71
: 255.255.248.0
: 192.168.8.254
: OFF
: OFF
- 70 -
Advertisement
Table of Contents
