System Commands Overview; Help] - KTI Networks KVB-311 User Manual

5.3 System Commands Overview

5.3.1 [help]

Press help/man/ ? will display all command list of the gateway. The following table lists
all of the commands that you can use with the Gateway. Refer to the following
chapters for descriptions of commonly used commands.
This user's guide describes commands that are helpful for configuring the
Gateway. Using commands not documented in the user's guide can damage the
unit and possibly render it unusable.
VoIP Gateway Commands
Command
help
quit
debug
reboot
commit
ifaddr
time
ping
pbook
pppoe
flash
sysconf
sip
security
voice
support
tos
phone
bureau
rom
auth
DESCRIPTION
Input help/man/? to list all command list.
Input quit/exit/close to exit telnet connection.
Add debug flag and display debug messages.
Reboot local machine.
Save all data.
Internet address manipulation.
Show current time.
Test if an IP address is reachable.
Phone book information and configuration.
PPPoE parameters manipulation.
Clean all configuration from flash rom.
System information manipulation.
Configure SIP related parameters.
This command is used to configure the account information
included username and password obtained from the service
provider.
Voice information manipulation.
Special functions support manipulation.
Set DSCP values for QOS.
Setup of call progress tones and ring (SLIC control).
To set Hotline function which must be under Peer-to-Peer mode and
switch to hotline service.
ROM file update.
Set configuration items for "administrator" user.
KVB-311 Broadband VoIP Router User Manual
- 65 -