Table of Contents
Advertisement
-faxtype: FAX Payload Type. range: 96~128 inter-used:100,102~105.
-2833type: RFC2833 Payload Type. Range: 96~128 inter-used: 100, 102~105.
-lcdrop: Disconnect Supervision (Loop Current Drop) (ON:1 / OFF:0).
-droptime: Period of Loop Current Drop (ms).
-eod: It will transfer the DTMF in [#] if users disable the end of dial function. Users
have to press the keypad in [#] if the end of dial function is enable.
Note:
User can also define IP address here in P2P mode, once user press "#",
Gateway will call out this IP address.
-callerid: Support Bell Core, DTMF caller ID and NTT caller ID function. After the
first ring at destination site, device will send line number as caller ID to called site.
-dtmfstart: DTMF Caller ID Start Symbol.
-dtmfstart: DTMF Caller ID End Symbol.
For example:
usr/config$ sysconf -print
System information
Gateway Service
Inter-Digits time
BusyForward
Keypad DTMF type
End of Dial Digit
Caller ID Type
DTMF Caller ID Start Symbol : D
DTMF Caller ID End Symbol
RFC2833 Payload Type
FAX Payload Type
Disconnect Supervision
Loop Current Drop Time(ms) : 500
usr/config$
5.3.13 [sip]
This command is to configure SIP related parameters.
usr/config$ sip
SIP stack information and configuration
Usage:
sip [-print] [-mode pxmode] [-outpx IPaddmress] [-transport type]
KVB-311 Broadband VoIP Router User Manual
: 0
: 3
: OFF
: In-band
: #
: x
: C
: 96
: 101
: OFF
- 78 -
Advertisement
Table of Contents
