KTI Networks KVB-311 User Manual page 82

[-droptime digit][-eod digit] [-callerid type]
[-service used][-dtmfstart digits] [-dtmfend digits]
sysconf -print
-print Display system overall information and configuration.
-idtime Inter-Digits time.(1~10 sec)
-service Specify gateway service type. (0: Dial in service,
1: HotLine service.)
-keypad Select DTMF type: 0=In-band,
-faxtype
inter-used:100,102~105)
-2833type
inter-used:100,102~105)
-lcdrop Disconnect Supervision(Loop Current Drop) (ON:1 / OFF:0)
-droptime Period of Loop Current Drop (ms)
-eod End of Dial Digit setting(0: none, 1: *, 2: #)
-callerid Caller ID Type setting, 0: Disable,
-dtmfstart DTMF CallerID Start Symbol.
-dtmfend DTMF CallerID End Symbol.
Example:
sysconf -keypad 0 -eod 2 -callerid 1
usr/config$
Parameter Usages:
-print: Print current sysconf settings.
-idtime: Set the duration (in second) of two pressed digits in dial mode as timed
out. If after the duration user hasn't pressed next number, it will dial out all number
pressed (1-10 seconds).
-service: set SIP Phone to be normal mode or under hotline mode.
(sysconf –service 0/1, 0 for normal service, 1 for hotline service.)
-keypad: DTMF replay type. When value is "1", the Gateway will transfer DTMF
signal via RTP payload as defined in RFC2833. When the value is set to "0", the
DTMF type is set as In-band, and 2 for SIP info DTMF.
KVB-311 Broadband VoIP Router User Manual
1=RFC2833.
2=INFO.
FAX Payload
RFC2833 Payload
1: FSK(BELLCORE),
2: DTMF,
3: NTT.
Type
Type
(range:96~128
(range:96~128
- 77 -