Application Mode-Proxy/Peer-To-Peer Mode - KTI Networks KVB-311 User Manual

2.1.3.3 Application mode-Proxy/Peer-to-Peer Mode

After setting IP address, user must assign the gateway to work under Proxy mode or
Peer-to-Peer mode. If there is no Gatekeeper, configure your gateway as Peer-to-Peer
Mode.
2.1.3.3.1 Proxy mode
Proxy mode means that there will be an intermediate Proxy Server between the VoIP
Gateway and the remote entity. While operating at this mode, the Gateway will first
register to the Proxy Server located at the ISP side. For the following operation, it
sends the INVITE message to the Proxy Server once you initiate a session. Then the
Proxy server will forward the INVITE message to the right place. And the Response
message from the remote entity will be forwarded back to you via Proxy server.
Step 1. Configure the VoIP Gateway SIP Configuration. Click SIP Information on the
navigation panel. In the SIP Information screen, select Proxy routed Mode
function.
Step 2. Set the SIP information from your service provider: Proxy IP Address, Line1
Number, Line1 Account, Line1 Password, and click the OK button.
Note:
1. Please contact with your Proxy vendor to obtain user account information.
2. If no need to enter password, user also has to set security information, please set
"name" the same with line number.
3. The Gateway uses "line number" to register to proxy server, the "name" is only for
authentication.
KVB-311 Broadband VoIP Router User Manual
- 15 -