Nat Mode (Pppoe) - KTI Networks KVB-311 User Manual

3.2 NAT mode (PPPoE)

Step 1. Set PPPoE mode, using [pppoe –dve 1], input the user id & password
provided by your ISP, using [pppoe –id –pwd], reboot the device after
disconnection, using [pppoe –reboot 1]
usr/config$ pppoe –dve 1 (PPPoE used)
usr/config$ pppoe –open (PPPoE open)
usr/config$ pppoe –id 123@hinet.net (PPPoE login account)
usr/config$ pppoe –pwd 123 (PPPoE login Passowd)
usr/config$ pppoe –reboot 1 (Enable)
Step 2. Set NAT function (Default NAT function is enable)
usr/config$ ifaddr -nat 1
For example:
usr/config$ ifaddr -print
Internet address information
LAN IP address
WAN IP address
Subnet mask
Default gateway
NAT enabled
DHCP startup
SNTP
IPSharing
Primary DNS Server
Secondary DNS Server : 168.95.1.1
usr/config$
KVB-311 Broadband VoIP Router User Manual
: 192.168.123.123
: 192.168.13.71
: 255.255.248.0
: 192.168.8.254
: ON
: OFF
: mode=1
server 168.95.195.12
time zone : GMT+8
cycle=1024 mins
: no IPSharing device.
: 168.95.192.1
- 31 -