Note:
With Dynamic WAN IP Address, when the WAN IP is changed, we need to
change the external IP of VoIP Gateway using above command.
1.
Different Vendor's Router will have different appearance of setting.
2.
Once you set the DMZ Host, you don't need to configure the Port Forwarding
and vice versa.
3.
If there is only one Gateway attached to the IP Sharing device, it is
recommended to use DMZ Host setting to enable the NAT traverse and
disable the Port Forwarding.
4.
If there are two or more sets of Gateways attached to the IP-Sharing device,
please configure the Port Redirection (Forwarding) to enable the NAT
traverse and disable the DMZ Host.
5.
After the IP Sharing configuration of the Gateway and IP Sharing device is
complete, you must reboot the Gateway to activate the new settings.
KVB-311 Broadband VoIP Router User Manual
- 30 -