Flash] - KTI Networks KVB-311 User Manual

-id: Input the User name ID provided by ISP
-pwd: Input the User name password provided by ISP
-reboot: Reboot the PPPoE connection.
-echo: Enable or Disable PPPoE echo request function.
For example:
usr/config$ pppoe -print
PPPoE adapter information
Device
Status
User name
Password
Reboot
Echo
usr/config$

5.3.11 [flash]

Clean the configuration stored in flash.
usr/config$ flash
Flash memory information and configuration
Usage:
flash [-clean]
flash -clean Clean the configuration stored.
Note:
This command will clean the configuration stored in
the flash and reboot it.
usr/config$
Parameter Usages:
-clean: clean all the user defined value, and reboot Gateway in factory default
mode.
Note:
1. It is recommended to execute [flash –clean] after application firmware been
KVB-311 Broadband VoIP Router User Manual
: Enabled
: Not initialized
: pppoe
: *****
: No
: Enable
- 75 -