Copying The Settings Of A Picture Profile; Resetting A Picture Profile - Sony PMW-10MD Operating Instructions Manual

Registering a picture profile
1
Press the PICTURE PROFILE button.
The Picture Profile menu is displayed.
2
Make the settings of the picture profile
items.
For details on the setting items, see "Picture
profile items" on page 45.
3
When the settings are completed, press
the PICTURE PROFILE button to exit
the menu.
Recalling a picture profile
Press the + or – PROFILE SEL button.
The number of the currently loaded picture
profile file appears in the display window.
With each press of the + button, you can select
picture profile files in the order
1t2t3t4t5t6t1... With each press of
the – button, you can select picture profile files in
the order 1t6t5t4t3t2t1...
When you change the profile selection, the image
characteristics of this unit change according to the
loaded picture profile.
Note
The PROFILE SEL + and – buttons are disabled
when:
• the LOCK button is on.
• the Picture Profile menu is displayed.
• a freeze image is displayed (the FREEZE button
is on).
• during clip recording, "Shutter" >"Mode" in the
currently selected Picture Profile menu is set to
"EXSLS".
To recall a picture profile by foot switch
Set "Foot Switch" of the OTHERS menu to "PP1/
PP2" (see page 68).
Each press of the foot switch recalls picture
profile 1 and picture profile 2 alternately.
44
Picture Profiles
Copying the settings of a picture
profile
You can copy the settings of a selected picture
profile to another picture profile.
1
Refer to the procedure in "Registering
and recalling picture profiles" (page 43)
and select the source picture profile.
2
Press the PICTURE PROFILE button.
The Picture Profile menu appears.
3
Select "Copy" from the Picture Profile
menu.
The picture profile numbers are listed on the
bottom of the screen.
4
Specify the target picture profile.
"Execute" and "Cancel" are displayed.
5
Select "Execute."
Copying begins.
When copying ends, the completion message is
displayed for three seconds, and the original
screen display is restored.

Resetting a picture profile

You can reset a selected picture profile to the
factory settings (standard status).
1
Refer to the procedure in "Registering
and recalling picture profiles" (page 43)
and select the source picture profile.
2
Press the PICTURE PROFILE button.
The Picture Profile menu appears.
3
Select "Reset" from the Picture Profile
menu.
"Execute" and "Cancel" are displayed.
4
Select "Execute."
Resetting begins.
When resetting ends, the completion message is
displayed for three seconds, and the original
screen display is restored.