Shooting/Recording; Basic Operation Procedure - Sony PMW-10MD Operating Instructions Manual

Shooting/Recording

Basic Operation Procedure

The basic shooting/recording procedure is as follows.
MAIN POWER switch
On/Standby button
Preparations
1
Connect the CCU and camera head (see
page 21), and connect the CCU to a
video monitor (see page 56).
2
Connect the CCU to an AC power
source, and press the { side of the MAIN
POWER switch (see page 22).
3
Insert an SxS memory card (see page
27).
If you insert a second card, the unit will
switch to the second card automatically when
the first card becomes full.
Shooting (ATW mode, AE function)
1
Press the On/Standby button to light it.
FREEZE/FLASH button
PHOTO button
REC/STOP button
AE button
WHITE BAL button
REC REVIEW button
Menu/media operation section
The unit starts, and the camera output picture
appear in the monitor screen.
The initial settings screen appears when the unit
starts for the first time. You will need to set the
date and time before the camera output picture
appears. For details, see "Setting the Clock"
(page 23).
2
Select ATW with the WHITE BAL
button.
3
Press the AE button to light it.
See "Shooting" (page 49) for details about
shooting operations.
Recording video (clips)
1
Press the REC/STOP button.
Recording of a clip starts.
Basic Operation Procedure
To AC power source
35