.
TLCS
7 On
*
MF
m
1 1.5 2
3 4 5 7 10 15 20 30
oo
ND1 ++ F1.9 18dB SHT:1/2000
ATW 4300K
PP1
You can select picture profiles with the Direct
menu by operating the joystick or the jog dial.
For details on the Direct menu, see “Direct Menu
Operation” on page 25.
Copying the Settings of a Picture
Profile
You can copy the settings of a selected picture
profile to another picture profile.
1
Select the source picture profile by
proceeding from step 1 to 3 of
“Selecting a Picture Profile using the
PICTURE PROFILE menu” on page 90.
2
Select “Copy” from “SET” of the
PICTURE PROFILE menu.
The picture profile numbers are listed on the
screen.
3
Specify the target picture profile.
“Execute” and “Cancel” are displayed.
4
Select “Execute.”
Copying begins.
When copying ends, the completion message is
displayed for three seconds, and the original
screen display is restored.
Resetting a Picture Profile
You can reset a selected picture profile to the
factory settings (standard status).
1
Select the picture profile you wish to
reset by proceeding from step 1 to 3 of
“Selecting a Picture Profile using the
PICTURE PROFILE menu” on page 90.
2
Select “Reset” from “SET” of the
PICTURE PROFILE menu.
“Execute” and “Cancel” are displayed.
Page 90