Copying Picture Profile Settings - Sony MCC-1000MD Instructions For Use Manual

Selecting a picture profile
To select a picture profile with PROFILE button
Press the PROFILE button and select the picture
profile you want to activate.
The lit indicator changes with each press of the
button, activating the picture profile of the lit
number.
Tip
Holding down the PROFILE button allows you to
select the picture profile in reverse order.
Note
The way in which the picture profiles change is
determined by the [Profile] > [Profile Selection
Range] setting in the [Picture] menu.
PROFILE button
Each time the profile is changed, the unit will
adjust the image quality according to the selected
profile.
To load a picture profile from the [Picture] menu
1
Display the menu screen, and in the
[Picture] menu, select [Profile] and then
press the ENTER button.
2
Select [Select], and press the ENTER
button.
3
Select the profile to load, and press the
ENTER button.
The unit will adjust the image quality
according to the selected profile.
4
Press the
menu screen.
Registering a picture profile
When you change the settings after a picture
profile is activated, the settings for the activated
picture profile number will be overwritten
automatically.

Copying picture profile settings

You can register the setting information for the
current picture profile as a separate profile
number.
1
Display the menu screen, and in the
[Picture] menu, select [Profile] and then
press the ENTER button.
2
Select [Copy to], and press the ENTER
button.
3
Select the profile to register the setting,
and press the ENTER button.
37
MENU button to close the