Sony PMW-10MD Operating Instructions Manual page 46

PICTURE PROFILE SET
Items
AE
Specifying operating
conditions of the AGC
ATW Speed
Setting for Auto Tracing
White Balance
White
White gain offsets and preset
white color temperature
Flicker Reduce
Setting Flicker
Compensation Mode
46
Picture Profiles
Subitems and setting values Contents
Level
–2.0 / –1.5 / –1.0 / –0.5 / ±0 /
+0.5 / +1.0 / +1.5 / +2.0
–1.0: PP5
+0.5: PP6
Mode
Backlight / Standard /
Spotlight
Speed–99 to +99 (+50)
AGC Limit
3 / 6 / 9 / 12 / 15 / 18 / 21dB
A.SHT Limit
1/100 / 1/150 / 1/200 / 1/250 / 1/
500 / 1/1000 / 1/2000 / 1/5000 /
1/10000 / 1/20000 (for 1080/
60i) or 1/16000 (for 1080/50i)
1 / 2 / 3 / 4 / 5
R Gain Offset
–99 to +99 (±0)
B Gain Offset
–99 to +99 (±0)
Preset White
2100 to 10000 (3200)
Mode
Auto / On / Off
Frequency
50Hz / 60Hz
Set the target level (to make brighter or darker) of
AGC and Auto Shutter control.
+2.0: Approx. two stop further open
+1.5: Approx. one and half a stop further open
+1.0: Approx. one stop further open
+0.5: Approx. half a stop further open
±0: Standard
–0.5: Approx. half a stop further closed
–1.0: Approx. one stop further closed
–1.5: Approx. one and half a stop further closed
–2.0: Approx. two stop further closed
Set the control mode for AGC and Auto Shutter
control.
Backlight: Backlight mode to reduce darkening of
the center subject against lights
Standard: Standard mode
Spotlight: Spotlight mode to reduce blown-out
highlights on the center subject in the spotlight
Set the tracing speed of AGC and Auto Shutter
control.
Set the maximum gain in AGC.
Set the maximum shutter speed in Auto Shutter
control.
Set the tracing speed of ATW.The larger number
you set, the speed becomes faster.
Set the R gain offset value. This setting is used
when the white balance adjustment mode is
Memory or ATW.
Set the B gain offset value. This setting is used
when the white balance adjustment mode is
Memory or ATW.
Set the preset color temperature in steps of 100K.
This setting is used when the white balance
adjustment mode is Preset.
Set the operation of the Flicker-Reduction function.
On: To always activate it
Auto: To automatically activate it when flicker is
detected.
Off: To not activate it
Set to the power supply frequency of the light
source causing flicker.