Sony PMW-10MD Operating Instructions Manual page 68

OTHERS
Menu items Subitems and setting values Contents
Photo
Flash TRG
Setting for flash
shooting and still
image recording
Num of Frames
Delay
Number Set
Foot Switch
Setting the
function of the foot
switch connected
to the FS/TRIG
connector
Audio Input
Setting the audio
input channel
Format Media
Media (A)
Formatting SxS
memory cards
Media (B)
Version
Showing the
version of this unit
68
Setup Menu List
CMOS / OPEN_CL
4 / 6
When "Num of Frames" is 4: 0
and integer numbers from 1 to 8
When "Num of Frames" is 6: 0
and integer numbers from 1 and
12
100 to 999 (101)
FreezePhoto
Rec/Stop
PP1/PP2
EXT CH Select CH-1
CH-1/CH-2
Execute / Cancel
Execute / Cancel
Vx.xx
Select the flash trigger signal output mode.
CMOS: Select the CMOS level.
OPEN_CL: Select the open collector.
Set the number of frames accumulated for flash shooting
Set the delay for flash shooting
Set the directory number in which still images are stored.
FreezePhoto: Recording a still image. A press of the switch
freezes a frame of the camera output picture (displays a
still image). A press and hold of the switch for more than
two seconds records the still image.
Rec/Stop: Recording video. A press of the foot switch starts
recording, and the next press of the switch stops the
recording.
PP1/PP2: Switching picture profiles. Each press of the foot
switch recalls picture profile 1 or picture profile 2.
Select whether to record the signal input to channel 1 on both
channel 1 and channel 2 or record the signal input to channel
1 on channel 1, and record the signal input to channel 2 on
channel 2.
Select "Execute" to format the SxS memory card in slot A.
Select "Execute" to format the SxS memory card in slot B.
The current software version of the unit is displayed.