Sony PMW-10MD Operating Instructions Manual page 2
Hd video camera
Hide thumbs
Also See for PMW-10MD:
- Brochure (2 pages) ,
- Specification sheet (2 pages) ,
- Instructions before use (163 pages)
Table of Contents
Advertisement
WARNING
To reduce the risk of fire or
electric shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing
to qualified personnel only.
THIS APPARATUS MUST BE
EARTHED.
Symbols on the products
This symbol indicates the
equipotential terminal which brings
the various parts of a system to the
same potential.
This symbol indicates the
manufacturer, and appears next to
the manufacturer’s name and
address.
This label is located on the top panel of the
unit.
See page 55 of these instructions for details
about how to attach the connector covers.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
For the customers in the U.S.A.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
All interface cables used to connect
peripherals must be shielded in order to
comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC
Rules.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Page 2
Advertisement
Table of Contents
