4
When the settings are completed, press
the PICTURE PROFILE button to exit
the menu.
Selecting a Picture Profile
Selecting a Picture Profile using the
P.PROFILE menu
Once you store a picture profile, you can call the
picture quality registered in the picture profile as
follows:
1
Press the PICTURE PROFILE button.
The P.PROFILE menu is displayed.
2
Operating the jog dial, select "SEL"
then the desired picture profile from the
list.
Example:
P.PROFILE
OFF
SEL
PP1: SceneA
SET
PP2: SceneB
PP3: SceneC
PP4: SceneD
PP5: SceneE
PP6: SceneF
The camcorder is adjusted to the picture
quality specified by the selected Profile.
(If you select "OFF," the camcorder will be
fixed at the standard picture quality, and no
picture adjustment is allowed.)
3
Press the PICTURE PROFILE button
to exit the menu.
The picture profile being selected is displayed
when you press the DISPLAY/BATT INFO
button.
.
TLCS
ATW 4300K
72
Picture Profiles
1 1.5 2
3 4 5 7
++ T1.6 18dB
PP1
Copying the Settings of a Picture
Profile
You can copy the settings of a selected picture
profile to another picture profile.
1
Select the source picture profile as
mentioned in "Selecting a Picture
Profile using the P. PROFILE menu".
2
Select "Copy" from "SET" of the
P.PROFILE menu.
The picture profile numbers are listed on the
screen.
3
Specify the target picture profile.
"Execute" and "Cancel" are displayed.
4
Select "Execute."
Copying begins.
When copying ends, the completion message is
displayed for three seconds, and the original
screen display is restored.
Resetting a Picture Profile
You can reset a selected picture profile to the
factory settings (standard status).
1
Select the picture profile you wish to
reset as mentioned in "Selecting a
Picture Profile using the P.PROFILE
menu" on page 72.
2
Select "Reset" from "SET" of the
P.PROFILE menu.
"Execute" and "Cancel" are displayed.
3
Select "Execute."
Resetting begins.
When resetting ends, the completion message is
displayed for three seconds, and the original
screen display is restored.