Sony PMW-10MD Operating Instructions Manual page 33

Hd video camera
Hide thumbs Also See for PMW-10MD:
Table of Contents

Advertisement

4.
Remote status indication
Displays "REMOTE" when this unit is being
operated remotely from a computer connect
to the REMOTE connector.
5.
Media remaining capacity indication
Displays the remaining capacity of the SxS
memory cards loaded in each slot.
On the basis of the remaining capacity of the
memory cards, the time that can be recorded
in the currently selected recording format
(recording bit rate) is calculated and
displayed in minute units.
The indication "---min" appears when no
recording media is loaded, and when an
unwritable memory card is loaded. The
mark appears when a memory card is
protected.
6.
AE function indication
Displays the currently selected AE function
adjustment mode.
: Backlight
: Standard
: Spotlight
You can select the AE function adjustment
mode using "AE" (see page 46) in the Picture
Profile menu.
7.
R and B gain offset indication
Display the R gain offset adjusted with the
RED knob and the B gain offset adjusted
with the BLUE knob (–99 to +99).
8.
White balance mode indications
Displays the current white balance
adjustment mode (W:M, W:P, or ATW) and
the color temperature.
9.
Picture profile indication
Displays the number of the currently selected
picture profile.
10.
AE level and BRIGHTNESS knob setting
indication
When the AE function is on, displays the
current AE level.
When the AE function is off, displays the
setting value of the BRIGHTNESS knob
(–50 to +21).
Using "Brightness MIN" (see page 45) and
"Brightness MAX" (see page 45) in the
Picture Profile menu, you can change the
minimum and maximum brightness values
which can be set with the BRIGHTNESS
knob.
11.
Total gain indication
When the AE function is on, displays
"AGC".
When the AE function is off, displays the
total gain as set according to setting of the
BRIGHTNESS knob.
12.
Shutter indication
When the AE function is on, displays
"SHT:AUTO" (because the auto shutter
function is turned on automatically).
When the AE function is off, displays one of
the following, according to the shutter mode
selected with Shutter >Mode (see page 45) in
the Picture Profile menu.
Off: Shutter off
Speed: "SHT:" and the shutter speed
ECS: "ECS:" and the ECS frequency
SLS (show shutter function): "SLS:" and
the number of accumulated frames
EXSLS (ultra-high sensitivity slow shutter
function): "SLS:" and the number of
accumulated frames
13.
Audio level meters
Display the audio input levels.
Note
When a microphone is not connected to the
MIC connector, the audio level meters may
be inaccurate by about three dots because of
noise.
14.
Recording format indication
Displays the setting of "Video Format"
(recording format, see page 67) in the
OTHERS menu.
See "Recording Signal Format Settings" (page
24) for more information about recording
formats.
15.
Warning and error messages
Displays warnings and error messages, such
as insufficient memory messages. (These
messages appear even if the DISPLAY
button is off.)
16.
Notifications and confirmation messages
Displays notifications and confirmation
messages, including messages that report the
progress or results of execution and message
that request confirmation or instructions.
Screen Display Settings
33

Advertisement

Table of Contents
loading

Table of Contents