Inverting The Picture; Picture Profiles; Registering And Recalling Picture Profiles - Sony PMW-10MD Operating Instructions Manual

Inverting the Picture

You can invert the camera output picture
vertically, horizontally, or both vertically and
horizontally, and record in that state. Use
"Inversion" (see page 47) in the Picture Profile
menu to turn inversion on and off and to set the
inversion direction.
Normal: Do not invert.
H: Invert in the horizontal direction.
V: Invert in the vertical direction.
H+V: Invert in both the horizontal and vertical
directions.

Picture Profiles

You can customize the picture quality, depending
on the conditions or circumstances of recording,
and store them as a picture profile, enabling the
picture quality to be resumed just by your
selecting the picture profile.
Six different picture profiles (PP1 to PP6) can be
stored in memory. The same standard (reference)
values are registered to six picture profiles at the
factory.
To register and copy picture profiles, use the
Picture Profile menu. To recall a picture profile,
use the PROFILE SEL buttons.
When a foot switch is connected to this unit, you
can switch between picture profile 1 (PP1) and
picture profile 2 (PP2) by foot switch (if "Foot
Switch" of the OTHERS menu is set to "PP1/
PP2").
Registering and recalling picture
profiles
Once you store a picture profile, you can call the
picture quality registered in the picture profile as
follows:
PROFILE SEL + and – buttons
and display window
Inverting the Picture / Picture Profiles
PICTURE
PROFILE button
43