Picture Profile Items - Sony PMW-10MD Operating Instructions Manual

Picture profile items

The factory-default values are shown in bold face (example:
for PP5 and PP6 picture profiles are different from the values shown in bold face.
PICTURE PROFILE SET
Items
Profile Name
Changing the picture profile
name
Shutter
Specifying operating
conditions of the electrical
shutter
Total Gain
Total gain value
Brightness MIN
Minimum value of the
BRIGHTNESS knob
Brightness MAX
Maximum value of the
BRIGHTNESS knob
Subitems and setting values Contents
Profile name
Mode
Off / Speed / ECS / SLS /
EXSLS
ECS: PP5
Shutter Speed
1/100
ECS Frequency
60.02
1904: PP5
SLS Frames
2 to 8
EXSLS Frames
16, 32, 64
0 to 21 dB
Integer from ±0 to –50 (–40)
Integer from ±0 to +21 (+18)
Off
). However, some factory-default values
Set the profile name in 8 characters at maximum.
You can use upper- and lowercase alphabetics,
numerics 0 to 9, - (hyphen), _ (underscore) and
space.
Select modes of the Electronic Shutter.
Selecting "Off" deactivates the shutter.
Set the shutter speed when Speed mode is selected.
The available setting values vary depending on the
video format being selected (see page 42).
Set the ECS frequency when ECS mode is selected.
The available setting values vary depending on the
frame rate of the video format selected.
Set the number of frames to accumulate when SLS
mode is selected.
Set the number of frames to accumulate when
EXSLS mode is selected.
Set the total gain value.
Set the minimum brightness value that can be set
with the BRIGHTNESS knob.
Set the maximum brightness value that can be set
with the BRIGHTNESS knob.
45
Picture Profiles