Sony PMW-10MD Operating Instructions Manual page 67

OTHERS
Menu items Subitems and setting values Contents
Clock Set
Date
Time
Setting the built-in
clock
12H/24H
12H / 24H
Date Mode
YYMMDD / MMDDYY /
DDMMYY
Genlock
GL H Phase
–999 to +999 (±0)
Setting the genlock
phase
H Advance
0H / 90H
Country NTSC Area
PAL Area
Setting the area for
use
Video Format
Country: NTSC Area
HQ 1080/60i
Selecting the
SP 1080/60i
recording format
Country: PAL Area
HQ 1080/50i
SP 1080/50i
Clip
Title Prefix
nnn_
Setting for clip
(nnn=least three digits of the
name or deletion
serial number)
Number Set
000l to 9999
Last Clip DEL
Execute / Cancel
All Clips DEL
Execute / Cancel
Set the current time and date.
Select the display mode of time.
12H: 12-hour mode
24H: 24-hour mode
Select the display mode of the date.
YYMMDD: In sequence of year, month, day
MMDDYY: In sequence of month, day, year
DDMMYY: In sequence of day, month, year
Set the H phase for genlock.
Set the V phase for genlock
90H: When the reference signal is SD, the HD SDI output
phase is advanced 90H. When the reference signal is HD,
the HD SDI output phase is synchronized and the SD
output phase is delayed 90H.
0H: The HD SDI and SD output phases are synchronized to
the reference signal.
Select the color system for the area where you will use the
unit.
Note
The output picture may fail to appear on your video monitor if
this item is set incorrectly.
Select the recording format (bit rate, picture size, frame rate,
and scan system in combination).
• Bit rate
HQ or SP
• Picture size
Fixed to 1080
• Frame rate
50, or 60
• Scan system
i (interlace)
Set the first 4-alphanumeric part of the clip names.
You can use upper- and lowercase alphabets, numerics 0 to 9,
- (hyphen), and _ (underscore).
Set the second 4-numeric part of the clip name.
Select "Execute" to delete the last recorded clip.
Select "Execute" to delete all clips on the active SxS memory
card.
Note
Clips to which OK mark is applied with the XDCAM EX Clip
Browsing Software cannot be deleted.
67
Setup Menu List