System expansions
Removing the board holder
►
Open the casing (see "Opening the casing").
Installing the board holder
a
If you want to install the board holder and a riser card is already installed, note that the
i
riser card is secured by the board holder. When you insert the board holder, make sure
that the riser card is fixed by the angle piece of the board holder.
32
a
a
►
Pull the board holder out of the casing in
the direction of the arrow.
►
Insert the board holder in the direction of
the arrow into the three tongue slots (a) of
the casing until it engages.
A26361-K679-Z120-1-7619, edition 2