System expansions
Removing WLAN module
►
Open the casing (see "Opening the casing").
►
Fold up the drive cage (see "Opening the drive cage").
►
Disconnect the USB cable of the WLAN module from the connector on the mainboard (1). See
technical manual for the mainboard.
►
Remove the two screws (2).
►
Pull the WLAN module out of the bay together with the USB cable.
i
Make sure that you do not scratch the antenna on the front opening of the drive cage.
►
Fold down the drive cage (see "Closing the drive cage").
►
Close the casing (see "Closing the casing").
52
2
2
1
A26361-K679-Z120-1-7619, edition 2