Installing a board
►
Open the casing (see "Opening the casing").
The locking slider also serves as the fixing bracket for the board on the casing rear panel.
i
You can only install the board if the locking slider has been moved to the right (from rear
view).
Removing the slot cover
2
Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot
!
cover (cooling, fire protection or EMC regulations to be complied with).
If you install a board, you must install the board holder to fix the riser card. The board
i
holder has been left out of the drawing to provide a better overview.
►
Make the required settings for the board.
A26361-K679-Z120-1-7619, edition 2
1
a
►
Push the slot cover in the direction of the
arrow up to the locking slider (1).
►
Push the slot cover (a) inward into the casing
and remove it from the casing (2).
System expansions
33