Operation
Indicators provided by the device
The indicators are on the front of the casing. Which indicators are available on your device depends
on the configuration level you have selected.
1 = Power-on indicator
2 = Hard disk indicator
1 - Power-on indicator
–
The indicator is green:
The device is on.
i
–
The indicator lights orange:
The device is ready-to-operate or in energy-saving mode. After being switched on with
the power button, the device switches on or returns to the state it was in before the
energy-saving mode.
In the energy-saving mode the device may not be disconnected from the mains
!
supply, as this may otherwise result in data loss.
–
The indicator does not light up:
The device is disconnected from the power supply or is ready for operation. If your device
is ready-to-operate it can be enabled with the ON/OFF switch.
2 - Hard disk indicator
The indicator lights up when the hard disk drive of the device is accessed.
3 - DVD indicator
The indicator lights up when the DVD drive of the device is being accessed. You may only remove
the CD/DVD when the indicator is dark.
4 - SmartCard reader indicator (optional)
The indicator lights up if a SmartCard is inserted.
The indicator flashes if no SmartCard is inserted.
18
The display can also light up green if the device has been switched off by
holding the ON/OFF switch (see the "Troubleshooting and tips" section).
1
2
3
4
3 = SmartCard reader indicator
4 = DVD indicator
A26361-K679-Z120-1-7619, edition 2