Using The Call Timer; Using The Pulse To Tone Dialing Feature; Using The Flash Button; Using The Pause Function - Bell BE-70PS Owner’s Owner's Manual

OPERATION - continued
1. Press the SPK button, the SPK LED will light.
2. Adjust the VOLUME control located on the right side of the telephone base
to a comfortable receive level.
3. You may pick up the handset at anytime and speakerphone will be can-
celled automatically.
4. When you have finished your call, press the SPK button, the SPK LED will
go out.

Using The Call Timer

The telephone has a built in timer that begins timing your calls five seconds
after you pick up the handset or press the SPK button to make a call.
1. The call timer will turn off after you hang up.

Using the Pulse to Tone Dialing feature

If you have rotary service, you can change from pulse dialing to touch tone
dialing during a call by pressing the ✳ ✳ ✳ ✳ key. This feature can be useful when
accessing long distance and tele-banking services.
1. The telephone will automatically return to pulse dialing mode after you
hang-up.

Using the Flash Button

The flash button allows you to easily access special telephone company fea-
tures such as call waiting, three way calling, etc.
1. Press the FLASH button to get a new dial tone without hanging up.
Using the Pause Feature
The pause function allows you to insert a 3.6 second pause in the dialing se-
quence when accessing long distance or tele-banking services.
1. Press the RD/P button at the desired point when dialing the number.
2. Additional pauses can be entered as required by pressing the RD/P button
as required.

Using the Redial Feature

The last number dialed (up to 32 digits) is automatically stored in memory.
1. To redial the last number dialed, lift the handset or press the SPK button.
2. When dial tone is heard, press the RD/P button. The number will appear on
the display as it is being dialed.
- 17 -
17