Adjusting The Contrast; Setting The Pbx Number; Turning Pbx Mode On Or Off; Changing The Pause Time - Bell Sonecor BE-3850 Installation And Operating Manual

SETTINGS

Adjusting the Contrast

The contrast is optimized for viewing and will probably not need to be changed
from the default setting. It will adjust the display background lighter or darker.
1. Press and hold the L/MENU key.
2. Press 5 to go to the contrast programming option.
3. Press E/EDIT to change the setting. "2" will
begin flashing.
CID Redial
Talk
Delete
4. Use the L M key to toggle between the three levels of
1 2
ABC 3
DEF
contrast.
4
5 6
GHI JKL
MNO
5. When the setting you desire is displayed, press
7 8 9
PQRS TUV
WXYZ
l/SAVE to save the setting. A double beep will
* 0 #
sound to confirm the setting has been saved.
Edit Menu
Save
Flash
Mute MEM
6. Continue with programming or press L/MENU to
return to the idle screen.

Setting the PBX Number

1. Press and hold the L/MENU key.
2. Press 6 to go to the PBX number programming
option.
3. Press E/EDIT to change the setting.
4. Use the L M key to customize the digit to match your
CID
Redial
Talk
Delete
PBX system.
1
2 3
ABC DEF
4 5 5. When the setting you desire is displayed, press
GHI 6
JKL MNO
l/SAVE to save the setting. A double beep will
7 8
PQRS 9
TUV WXYZ
sound to confirm the setting has been saved.
*
0 #
Edit Menu Save
6. Continue with programming or press L/MENU to
Flash Mute MEM
return to the idle screen.
Note: The number programmed here is not active unless PBX mode is On.
CONTRAST
2
#5 12
TOTAL
PBX NO.
9
#6 12
TOTAL
25
SETTINGS

Turning PBX Mode On or Off

1. Press and hold the L/MENU key.
2. Press 7 to go to the PBX mode programming
option.
3. Press E/EDIT to change the setting. "Off" will
begin flashing.
CID
Redial
Talk
Delete
4. Use the L M key to toggle between On and Off.
1
2 3
ABC DEF
5. When the setting you desire is displayed, press
4 5
GHI 6
JKL MNO
l/SAVE to save the setting. A double beep will
7 8
PQRS 9
TUV WXYZ
sound to confirm the setting has been saved.
*
0 #
Edit Menu Save
6. Continue with programming or press L/MENU to
Flash Mute MEM
return to the idle screen.
Note: You do not need PBX mode unless you need to dial a specific single digit
number before each outgoing call.

Changing the Pause Time

1. Press and hold the L/MENU key to enter the
menu.
2. Press 8 to go to the pause time programming
option.
3. Press E/EDIT to change the setting. "2" will
CID
Redial
Talk
begin flashing.
Delete
1
2 3
ABC DEF
4. Use the L M key to select the desired dialing delay.
4 5
GHI 6
JKL MNO
5. When the setting you desire is displayed, press
7 8
PQRS 9
TUV WXYZ
l/SAVE to save the setting. A double beep will
* 0
#
sound to confirm the setting has been saved.
Edit Menu Save
Flash Mute MEM
6. Continue with programming or press L/MENU to
return to the idle screen.
PBX MODE
OFF
#7 12
TOTAL
PAUSE TIME
2
#8 12
TOTAL
26