Appendix B Frus And Compatibility Matrixes; Mpus; Lpus - HP FlexFabric 11908-V Installation Manual

Appendix B FRUs and compatibility matrixes

This appendix describes the FRUs available for the switch and their compatibility.
All the FRUs listed in this appendix are hot swappable.

MPUs

MPU is the supervisor engine and core of the control management plane for the switch. The switch
supports the MPU LSU1SUPB9.
MPUs are ordered separately. The switch requires one MPU to operate correctly. You can also install two
MPUs for redundancy.
Table 19 describes the MPU specifications, and
matrix.
Table 19 MPU specifications
Item
Interfaces
Interface transmission
rate
Cables and max
transmission distance
Table 20 MPU product code and model matrix
MPU model
LSU1SUPB9

LPUs

Table 22 lists LPUs' product codes and descriptions. For more information about the transceiver modules
that each LPU supports, see
Table 21 LPU specifications
LPU model
LSU1TGS32SF9
LSU1SUPB9 supervisor engine
•
One console port for local or remote dialup configuration management
•
One 10/100/1000BASE-T interface for management and upgrade
•
Console port—No greater than 1 15200 bps and defaults to 9600 bps
•
10/100/1000BASE-T interface—10/100/1000 Mbps
•
Console port—15 m (49.21 ft) over common asynchronous serial interface cable
•
10/100/1000BASE-T interface—100 m (328.08 ft) over Category-5 twisted
pairs
Product code HP description
JG609A HP FlexFabric 11900 Main Processing Unit
"Transceiver modules."
Number of
Connector
interfaces
LC 32
Table 20 shows the MPU product code and model
Interface
transmission rate
1/10 Gbps
65
Available transceiver
modules
•
10-Gigabit SFP+ module
•
10-Gigabit SFP+ cable
•
Gigabit SFP module