Selecting Video Output - Panasonic AG-HPX301E Operating Instructions Manual

Selecting video output

The table below lists available video output formats.
Use the setting menus listed below to select video output.
Setting menu
SDI SELECT
(OUTPUT SEL screen)
SETUP
(SYSTEM SETUP screen)
DOWNCON MODE
(OUTPUT SEL screen)
*1 HD (1080i, 720P) output cannot display thumbnails and SDI OUT outputs monochrome black screen.

Select the signal format (from AUTO, 1080i, 576i (480i)) to be output via the SDI OUT
connector.
*1
When SYSTEM MODE is set to 480-59.94i, select the setup level for the signal
(composite) output via the VIDEO OUT connector.
 0%: 0% setup level for both output and recording
 7.5%A: 7.5% setup level for output only (0% for recording)
 The SETUP menu setting is enabled also during playback.
Select the screen type for down-converted output (VIDEO OUT and SDI SELECT output
as 576i (480i)) of HD mode (1080i, 720P).
Setting