Formatting SD memory cards
SD memory cards can also be formatted from the
thumbnail screen. With an SD memory card inserted into
the unit, perform the following operation:
1
PresstheTHUMBNAILbutton.
• T he thumbnail screen appears on the LCD
monitor.
2
PresstheTHUMBNAILMENUbuttonand
selectOPERATIONFORMATfromthe
thumbnailmenu.
• S elect "SD CARD" and press the SET button when
the screen shown below appears.
• S elect "EXIT" if formatting is not required.
3
Thefollowingscreenappears.Usethecursor
buttonsandtheSETbuttontoselectYES.
• T he SD memory card is formatted.
NOTE
You can also use the menu option SD CARD FORMAT in the
CARD FUNCTIONS screen to format SD memory cards.
For details, refer to [Formatting, Writing and Reading an SD
memory card] (page 86).
10
Setting the Thumbnail Display
Mode
The thumbnail display mode can be customized to suit
your preferences.
1
PresstheTHUMBNAILbutton.
• T he thumbnail screen appears on the LCD
monitor.
2
PresstheTHUMBNAILMENUbuttonand
selectTHUMBNAILSETUPfromthe
thumbnailmenu.
• T he following screen appears.
INDICATOR:
Select which indicators you want to show on
thumbnails and which you want to hide.
• ALL HIDE:
ON:
No indicators are displayed.
OFF:
Indication/No indication will be set
depending on the following menu.
The factory settings are as follows.
• MARKER:
Switches the shot mark marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
• TEXT MEMO:
Switches the text memo marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
• WIDE:
Switches the wide marker between indication
and no indication (ON/OFF). The factory
setting is ON (indication).
• PROXY:
Switches the proxy marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
DATA DISPLAY:
The time display field of the clip offers a choice
of Time Code (TC), User Bits (UB), Shooting
Time (TIME), Shooting Date (DATE), Shooting
Date and Time (DATE/TIME) or USER CLIP
NAME. The factory setting is Time Code.