Zebra Pattern Display - Panasonic AG-HPX301E Operating Instructions Manual

Zebra pattern display

The AG-HPX301E can display two zebra patterns.
Turning the ZEBRA switch on displays the zebra pattern
set in the menu in the viewfinder and LCD monitor. A menu
setting makes it possible to also display the zebra pattern
on video output via the VIDEO OUT connector.
ZEBRAswitch
Use the DISPLAY SETUP screen to set the level of zebra
pattern display.
Item Setting
ZEBRA1
50%...70%...109%
DETECT
ZEBRA2
50%...85%...109%
DETECT
ZEBRA2 ON, SPOT, OFF
Underlined values indicate factory defaults.
SPOT: A video level between ZEBRA1 and ZEBRA2
displays a zebra pattern.
Imagelevel
ON
109%
ZEBRA 2
DETECT
ZEBRA 1
DETECT
0%
To display a zebra pattern on video output via the VIDEO
OUT connector, make the required settings in the OUTPUT
SEL screen.
Description
Sets the level of the
right-leaning zebra
pattern 1.
Sets the level of the
left-leaning zebra
pattern 2.
Selects the ZEBRA2
type.
ZEBRA 2
OFF SPOT
OUTPUTSELscreen
Item Setting
ON:
Displays the zebra pattern
shown on the LCD monitor
and viewfinder of this
camera also in video
VIDEO OUT output via the VIDEO OUT
ZEBRA connector.
OFF:
The zebra pattern is not
displayed in video output
from the VIDEO OUT
connector.
Description
Specifies
whether or
not the zebra
pattern is
superimposed
on VIDEO OUT
signals.