Panasonic AG-HPX301E Operating Instructions Manual page 132

Item
REC FORMAT (Continued from the previous page)
(when SYSTEM MODE is 720-59.94P)
AVC-I100/60P, AVC-I100/30PN,
AVC-I100/24PN: Uses the AVC-I 100 codec for
recording. Shooting and recording at 60i, 30PN (native
recording) and 24PN (native recording).
AVC-I 50/60P, AVC-I 50/30PN, AVC-I 50/24PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 60i, 30PN (native recording) and 24PN
(native recording).
DVCPRO HD/60P, DVCPRO HD/30PN,
DVCPRO HD/24PN: Uses the DVCPRO HD codec
for recording. Shooting and recording at 60P, 30PN
(native recording) and 24PN (native recording).
(When SYSTEM MODE is set to 720-50P)
AVC-I100/50P, AVC-I100/25PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 50i, 25PN (native recording).
AVC-I50/50P, AVC-I50/25PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 50i, 25PN (native recording).
DVCPROHD/50P, DVCPROHD/25PN
Uses the DVCPRO HD codec for recording. Shooting
and recording at 50i, 25PN (native recording).
(when SYSTEM MODE is 480-59.94i)
DVCPRO50/60i, DVCPRO/60i, DV/60i: These use
DVCPRO50, DVCPRO and DV codecs, respectively.
Use CAMERA MODE options to set shooting mode.
Recording is locked at 60i.
(When SYSTEM MODE is set to 576-50i)
DVCPRO50/50i, DVCPRO/50i, DV/50i:
Uses the DVCPRO50, DVCPRO and DV codec for
recording respectively. Use CAMERA MODE options
to set shooting mode. Recording is locked at 50i.
CAMERA MODE Sets the shooting mode of the camera during
DVCPRO HD codec at 1080-50i (1080-59.94i) or
during 576-50i (480-59.94i).
(When SYSTEM MODE is set to 1080-50i or 576-50i)
50i, 25P
(When SYSTEM MODE is set to 1080-59.94i or 480-
59.94i)
60i, 30P, 24P, 24PA
SCAN REVERSE Cancels the image inversion that occurs with film
lenses and anamorphic lenses.
ON, OFF
ASPECT CONV Selects the aspect ratio for recording at 576i (480i).
SIDE CROP: Crops the right and left edges of the
image.
LETTER BOX: Adds black bands at the top and
bottom of the image.
SQUEEZE: Compresses the image horizontally.
SETUP Selects the setup level for the 480i video signal.
0%: Setup is switched to 0% for both VIDEO OUT
output and recording.
7.5% A: Setup is switched to 7.5% for VIDEO OUT
output and 0% for recording.
1
Setting Notes
• N ot available when 1080i or 720P
is set in SYSTEM MODE and REC
SIGNAL is 1394.
• Not available in USB DEVICE mode.
• D oes not appear when SYSTEM
MODE is set to 720-50P (720-59.94P).
• N ot available in the following
conditions.
- W hen the REC SIGNAL option is set
to 1394.
- W hen SYSTEM MODE is set to 1080-
50i (1080-59.94i) and REC FORMAT
is set to something other than
DVCPROHD/50i (60i).
• N ot available when SYSTEM MODE is
set to 1080-50i (1080-59.94i) or 720-
50P (720-59.94P).
• T his item is not displayed when
SYSTEM MODE is set to 1080-50i,
720-50P, 576-50i.
____ indicates the factory setting