Table of Contents
Advertisement
The card will not be formatted if the following message
appears when the JOG dial button is pressed:
Error message
Remedy
SD CARD FORMAT NG
NO CARD
Insert an SD memory card.
(No SD memory card
inserted.)
SD CARD FORMAT NG
ERROR
The card may be defective.
(SD memory card cannot be
Replace the card.
formatted.)
SD CARD FORMAT NG
WRITE PROTECT
Remove the card and
(SD memory card is write-
cancel the protect.
protected.)
SD CARD FORMAT NG
The SD memory card is
CANNOT ACCESS
not accessible. When the
(SD memory card not
current access operation
accessible).
ends, reformat the card.
How to Use Scene File Data
• E ach position of the SCENE FILE dial stores settings for
specific shooting situations.
• W hen shooting, you can retrieve the necessary file
instantly using scene file dial.
• Y ou can also use menu options to change set scene file
values. A modified scene file can be saved to each scene
file dial position.
SCENEFILEdial
• N ote that changing scene files during recording will
not change VFR and frame rate settings. To make such
changes, set the camera to recording standby status.
Factory setting
•F1:SCENE
File suitable for normal shooting.
•F:SCENEFLUO.
File suitable for shooting under fluorescent lights, ie.
indoors.
•F:SCENESPARK
File suitable for SD shooting with a greater range of
resolution, coloring and contrast.
•F:SCENEB-STR
File for increasing the contrast of dark areas, such as
when shooting sunsets.
•F:SCENECINEV
File suitable for shooting movie-like scenes where the
contrast is to be emphasized.
•F:SCENECINED
File suitable for shooting movie-like scenes where the
dynamic range is to be emphasized.
NOTE
Changes to scene files do not affect SYSTEM MODE settings.
Use the SYSTEM SETUP screen to make such changes.
Hide quick links:
Advertisement
Table of Contents
