Setup Menu List; Scene File Screen - Panasonic AG-HPX301E Operating Instructions Manual

Setup menu list

SCENE FILE screen

Item
LOAD/SAVE/INIT Loads, saves and initializes settings of the scene file
assigned to the current scene dial position (one F1
– F6 scene file).
LOAD: Loads data stored in camera memory.
SAVE: Saves current values in camera memory.
INITIAL: Returns settings to their factory defaults.
VFR Enables or disables variable frame rate (VFR) mode at
720P.
ON: VFR operation
OFF: VFR off
FRAME RATE Adjusts the frame rate and exposure time at 720P
when VFR is on.
(When SYSTEM MODE is set to 720-50P)
12, 15, 18, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32,
34, 37, 42, 45, 48, 50 FRAME
(When SYSTEM MODE is set to 720-59.94P)
12, 15, 18, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32, 34,
36, 40, 44, 48, 54, 60 FRAME
(SYNCHRO SCAN) Displays synchro scan shutter speeds to enable the
operator to synchronize the camera to computer
monitors.
• T his function only displays the shutter speeds. Use
the SYNCHRO SCAN switch to set a shutter speed.
• S et values (displayed values) are assigned to the
current scene file and manipulated using the LOAD,
SAVE and INIT functions.
For details, refer to [Placing the Camera-recorder in
SYNCHRO SCAN Mode] (page 56).
1/50.0
DETAIL LEVEL Adjusts the level of image outline correction (in
horizontal and vertical directions).
–7 ... 0
V DETAIL LEVEL Adjusts the level of correction in vertical direction.
–7 ... 0
DETAIL CORING Adjusts the level of noise reduction of the detail signal.
–7 ... +5
• A djust towards – for a clearer image. Noise
increases slightly.
• A djust towards + for less noise.
CHROMA LEVEL Adjusts the chroma level.
–7 ... 0
CHROMA PHASE Makes fine adjustments to the chroma phase.
–7 ... 0
COLOR TEMP Ach Makes fine adjustments to the color temperature (after
Ach white balance adjustment).
–7 ... 0
COLOR TEMP Bch Makes fine adjustments to the color temperature (after
Bch white balance adjustment).
–7 ... 0
*1 The factory default when the SCENE FILE dial is set to F1.
Setting
*1 ... +7
... +7
*1
... +7
*1
... +7
*1
... +7
*1
... +7
*1
... +7
*1
Notes
• A change in scene files affects only
the scene file at the current scene dial
position.
• A vailable only in 720P system mode.
(This message does not appear in
modes other than 720P.)
• T his setting cannot be made when
REC SIGNAL is 1394.
• A vailable only in 720P system mode
and when VFR is set to ON.
(This message does not appear in
modes other than 720P.)
• T his setting cannot be made when
REC SIGNAL is 1394.
• A change to 24 fps may cause the
screen to flicker momentarily.
• D isplayed in blue when not set to
synchro scan mode and when the
SYNCHRO SCAN switch settings are
not available.
• W hen SYSTEM MODE is set to 1080-
59.94i, 720-59.94i or 480-59.94i,
performing the INITIAL option of the
scene files will set the default value to
1/60.0.
____ indicates the factory setting
1