Table of Contents
Advertisement
Basic shooting operations (continued)
SD Memory Card access lamp
Illuminated orange:
Flashing orange (slow): Accessing card
Flashing green:
Illuminated green:
Off: No card inserted/unformatted, Unformatted
card or incompatible card inserted
When the USB is connected
Flashing orange:
Off: A status other than access underway.
SD Memory Card access lamp
Selecting a slot
Of the two SD memory card slots, the slot to be
used for recording can be switched.
1
Press the SLOT SELECT button while
recording is paused.
The access lamp of the slot for recording lights
up orange.
• This function works when a recordable SD
card is inserted in both slots.
• The slot cannot be switched during recording.
36
Reading/writing possible
Card write-protected/
CHECK CARD selection slot
no space left on card
Other than the selected
slot
Accessing card
Formatting SD Memory Cards
1
Set the camera's power switch to ON.
(Page 27)
2
Press the MENU button.
3
Select CARD FUNCTIONS→CARD
FORMAT from the menu, and then push the
OPERATION lever to confirm.
• Select the slot number of the card to format
when the following screen is displayed.
Select NO if you do not wish to format the
card.
• Press the MENU button to close the menu display.
4
Select YES on the conformation screen.
• The SD Memory Card will be formatted.
5
Press the MENU button to finish.
• When an SD Memory Card is formatted, all
data including video data and still images
recorded on the card will be erased and will
not be restorable.
Save all important data to your computer.
Advertisement
Table of Contents
