Installing The Full-Height Media Device Shipping Screw - HP ProLiant ML350 User Manual

PATA CD-ROM drive
o
IMPORTANT:
board. Connecting it to the SATA drive may interfere with other installed media bay devices.
SATA DVD-ROM drive
o
Install the access panel (on page 20).
9.
Do one of the following:
10.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o

Installing the full-height media device shipping screw

When shipping a server with a full-height media device installed, always install a shipping screw to
secure the device.
Be sure to connect the right-angle end of the SATA data cable to the system
Hardware options installation 44