Tower-To-Rack Conversion Option - HP ProLiant ML350 User Manual

Tower-to-rack conversion option

The tower-to-rack conversion kit includes all equipment required to convert the tower model server into a
rack model server and to install the server into most square- or round-hole racks.
The tower-to-rack conversion kit includes:
•
Rack rails
•
Cable management arm
•
Server rails
•
Cage nuts
•
Rack bezel
•
Cable management arm extender bracket, included with the server
In addition to the supplied items, you may need:
•
T-10 Torx screwdriver
•
T-15 Torx screwdriver
To convert a tower server to a rack server:
Power down the server (on page 17).
1.
Remove the tower bezel
2.
Remove the feet.
3.
Remove both tower configuration panels.
4.
("Open or remove the tower bezel" on page 18).
Hardware options installation 62