Remove the media bay blank.
3.
To replace the component, reverse the removal procedure.
Half-height or full-height media device
To remove the component:
Power down the server (on page 26).
1.
Do one of the following:
2.
Unlock and remove the bezel
•
Extend the server from the rack (on page 26).
•
Remove the access panel
3.
Disconnect data and power cables.
4.
Remove the device.
5.
Half-height
•
("Front
bezel" on page 27).
("Access
panel" on page 29).
Removal and replacement procedures 38