Parallel And Second Serial Connector Option - HP ProLiant ML350 User Manual

Close the expansion slot latch to secure the board.
7.
Connect any required internal cables to the expansion board. Refer to the documentation that ships
8.
with the expansion board.
Install the expansion board retainer.
9.
Install the access panel (on page 20).
10.
Do one of the following:
11.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Connect any required external cables to the expansion board. Refer to the documentation that ships
12.
with the expansion board.

Parallel and second serial connector option

To install the component:
Power down the server (on page 17).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 17).
o
Remove the access panel (on page 19).
3.
Remove an expansion slot cover
4.
Install the parallel and serial connector bracket and close the slot cover.
5.
Connect the parallel and serial cables to the parallel and serial connectors on the system board.
6.
Install the access panel (on page 20).
7.
Do one of the following:
8.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Power up the server (on page 17).
9.
("Open or remove the tower
("Removing the expansion slot
bezel" on page 18).
cover" on page 48).
Hardware options installation 51