Installing An Expansion Board - HP ProLiant ML350 User Manual

Push the release latches on the expansion board retainer and pull the retainer out away from the
4.
chassis.
Remove the expansion slot cover.
5.
CAUTION:
all PCI slots have either an expansion slot cover or an expansion board installed.

Installing an expansion board

CAUTION:
remove all AC power cords before removing or installing the expansion boards.
Power down the server (on page 17).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
To prevent improper cooling and thermal damage, do not operate the server unless
To prevent damage to the server or expansion boards, power down the server and
("Open or remove the tower
Hardware options installation 49
bezel" on page 18).