Remove The Server From The Rack; Access The Server Rear Panel (Rack Model); Open Or Remove The Tower Bezel - HP ProLiant ML350 User Manual

After performing the installation or maintenance procedure, press the rail-release latches and slide
3.
the server back into the rack.

Remove the server from the rack

To remove the server from an HP, telco, or third-party rack:
Power down the server (on page 17).
1.
Disconnect the cabling.
2.
Extend the server from the rack (on page 17). Reverse the server installation steps in the
3.
documentation that ships with the rack-mounting option.
Remove the server from the rack.
4.
Place the server on a sturdy, level surface.
5.

Access the server rear panel (rack model)

If the procedure requires accessing the server rear panel, unlock the cable management arm and swing
the arm away from the server. For information on unlocking the cable management arm, refer to the
installation instructions that ship with the 3-7U Quick Deploy Rail System.

Open or remove the tower bezel

This server has a removable bezel that must be unlocked and opened before accessing the front panel
components. The bezel should be kept closed during normal server operations.
Use the key provided with the server to unlock the bezel with a clockwise turn.
If necessary, remove the bezel.
CAUTION:
side.
To avoid breaking the bezel, remove the bezel before placing the server on its
Operations 18