Creating A Full-Height Device Bay Blank - HP ProLiant BL620c G7 User Manual

Remove the divider from the enclosure.
d.

Creating a full-height device bay blank

Obtain the coupler plate:
1.
If you are using a device bay blank that came with the enclosure, the coupler plate can be found
o
with the contents of the full-height device shipping box.
If you are using a device bay blank that you purchased as an option, remove the coupler plate from
o
inside the blank.
Fit the coupler plate into the slots on top of the blank, and then slide the coupler plate back until it snaps
2.
into place.
Setup 25