Slide the drive into the bay until it clicks.
8.
When shipping a server with a full-height device installed, replace the front guide screw with a shipping
9.
screw
("Installing the full-height media device shipping
Install the access panel (on page 27).
10.
Do one of the following:
11.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Installing the full-height media device shipping screw
When shipping a server with a full-height media device installed, always install a shipping screw to secure
the device.
Install the full-height media device
1.
Remove the front guide screw from the full-height media device.
2.
Remove the silver shipping screw from the chassis.
3.
screw" on page 64).
("Installing a half-height or full-height media
device" on page 62).
Hardware options installation 64