Interlogix TruVision 10 User Manual page 93

To set up a preset tour:
1. From the menu toolbar, click
2. Select the preset tour number.
3. In the preset tour toolbar, click
window appears. Select the preset number, dwell time, and speed of the step. Click
OK to save the settings.
Note: A preset tour should have at least two presets.
4. Repeat step 3 to configure other steps in the preset tour.
5. Click Back to return to live view.
To delete a preset tour:
1. From the menu toolbar, click
2. From the preset list, select a tour number and click
preset tour.
– Or –
In the preset tour toolbar, click
3. Click Back to return to live view.
To call up a preset tour:
• PTZ control panel:
1. In live view, left-click the mouse and select the PTZ control icon in the quick access
toolbar. The PTZ control panel appears. Select the desired camera from the toolbar.
– Or –
On the front panel, select the desired camera and press
access toolbar. The PTZ control panel appears.
2. Scroll the toolbar to
camera immediately carries out the preset tour movement.
• Menu toolbar:
1. From the menu toolbar, click
2. Select the desired preset tour from the list and click
stop the preset tour.
3. Click Back to return to live view.
TruVision NVR 10 User Manual
PTZ Settings
to add a step to the preset tour. The Step pop-up
PTZ Settings
to delete all the presets for the selected tour.
Tour and double-click the desired preset tour from the list. The
PTZ Settings
Chapter 11: Controlling a PTZ camera
> General.
> General.
to delete the selected the
Enter
> General.
to start the tour. Click
to call up the quick
to
87