Interlogix TruVision 10 User Manual page 132

Chapter 16: Using the web browser
Menu Function
Network Settings General
PPPoE
DDNS
Email
UPnP
SNMP
FTP
More Settings
Alarm Settings Alarm Input
Alarm Output
Advanced Settings
Notification
User Management
HDD Management Basic Settings
Storage Mode
S.M.A.R.T. Settings
Maintenance
System Camera, Record,
Information Alarm, and Network
126
Description
Define the general network settings. See "General
network settings" on page 45 for more information.
Define the PPPoE settings. See "PPPoE" on page 46 for
more information.
Define the DDNS settings. See "DDNS" on page 47 for
more information.
Define the settings to send an email. See "Email" on
page 49 for more information.
Enable this function so that the NVR can automatically
configure its own port forwarding. See "UPnP" on page
50 for more information.
Define the SNMP settings. See "SNMP" on page 50 for
more information.
Define the FTP settings. See "FTP server setup to store
snapshots" on page 50 for more information.
Define a remote alarm host, multicast IP as well as the
server, HTTP, and RTSP ports. See page 51 for more
information.
Define the alarm input parameters for when an external
alarm is triggered. See "Setting up external alarms" on
page 39 for more information.
Define the response when an external alarm is triggered.
See "Setting up external alarms" on page 39 for more
information.
Define the warning buzzer time. See "Modifying the
warning buzzer" on page 35 for more information.
Define the notification parameters when irregular events
occur such as HDD full. See "Description of alarm
notification types" on page 35 and "Setting up system
notifications" on page 38
Define, modify, and delete users. See Chapter 15 "User
management" on page 115 for more information.
Define the HDD basic settings and Initialize the HDD.
See "Initializing HDDs" on page 57 for more information.
Define the storage mode of the HDD. See "Controlling
disk storage mode on the HDD" on page 57 for more
information.
List the S.M.A.R.T. information on the HDD.
Remotely update the NVR firmware, restore default
factory settings, restart the NVR, and import/export
parameters remotely. See Chapter 14 "NVR
management" on page 109 for more information.
Review the status of the cameras, recordings, alarms,
and network. See "Viewing system information" on page
110 for more information.
TruVision NVR 10 User Manual