Using The Mouse - Interlogix TruVision 10 User Manual

Chapter 4: Operating instructions
Task
Pause mode
PTZ control mode
Menu navigation
Note: The non-PoE version of the NVR is not available in the Americas.

Using the mouse

The USB mouse provided with the NVR can be used to operate all the functions of the
NVR, unlike the front panel which has limited functionality. The USB mouse lets you
navigate and make changes to settings in the user interface.
Connect the mouse to the NVR by plugging the mouse USB connector into the USB
port on the front or back panel. The mouse is immediately operational and the pointer
should appear.
Note: Use a USB 1.1 or higher mouse.
Move the pointer to a command, option, or button on a window. Click the left mouse
button to enter or confirm a selection.
You can purchase a spare mouse by ordering part number TVR-MOUSE-1.
See Table 4 below for a description of the mouse buttons.
18
Button Button function
Reverse Press to play back a camera in reverse direction.
In Picture Playback mode, view pictures in reverse direction.
Pause In Playback mode, stop playback.
Play In Playback mode, play back a camera in the forward direction.
Direction The left and right buttons are used to jump recorded video
forwards or backwards by one frame. The up and down buttons
are used to jump recorded video forwards or backwards by one
second.
Direction Press to control the movement of the PTZ camera.
Zoom +/- Press to zoom in and out.
Preset Press Preset and a numeric button to call the specified preset.
Tour Press Tour and a numeric button to call the specified shadow
tour.
Play Press to do an auto tour.
Display Press to delete a selected key point from the PTZ Setting >
More Settings> Tour > Key Point list.
Direction Press to navigate between different fields and items in menus.
Menu Enter/exit the main menu.
Enter Press to confirm the selection in any of the menu modes.
Seq Press to switch between different tabs in a menu window.
TruVision NVR 10 User Manual