Configuring Time And Date - Interlogix TruVision 10 User Manual

Chapter 10: Live view
Figure 21: Monitor Setup window: More Settings
Table 12: Description of the Monitor Setup window: More Settings
Option
1. Output Mode
2. Event Hint
3. TimeBar Transparent
4. Enable TimeBar
5. Menu Timeout
6. Mouse Pointer Speed
7. Instant Playback Time
8. Enable Front Panel
Lock

Configuring time and date

You can set up the date and time that will appear on-screen. It is not included in
recordings. This time and date display is separate from the embedded one that appears
for each camera (see "Configuring the camera OSD settings" on page 65 for more
information on embedded camera time and date).
80
Description
Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright, Soft,
or Vivid.
Define whether the event hint icon appears on-screen. See "Status
information" on page 71 for more information.
Modify the transparency of the menus on-screen relative to the
background to make the menu screens easier to read or less prominent
on-screen. Default is non-transparent.
Select one of the options from the check box.
Check the box to enable or disable and click Apply.
Enable/disable the Time Bar in live view mode.
Define the time in minutes after which the menu window reverts to live
view mode.
Select a time from the drop-down list and click Apply.
Modify the speed of the mouse pointer.
Adjust the scroll bar point to the desired level and click Apply.
Modify the instant playback replay period. The time options are between 5
and 30 minutes from the actual time. Default is five minutes
When the system is logged out, the front panel is automatically locked
after several minutes. To unlock the front panel, press the
5 seconds.
Live button for
TruVision NVR 10 User Manual