Note: The system time and date are visible in the window. However, they do not
appear in recordings.
Click
Next
to move to the next page, or
7. Network configuration:
Configure your network settings such as the NIC type, Enable or Disable DHCP, IP
address, subnet mask, default gateway, and UPnP. Enter the preferred DNS server
address as well as the alternate one to use.
Click
Next
to move to the next page, or
8. HDD management:
Configure your HDD settings as required.
You can group HDDs and assign cameras to a group. See "Setting up HDD groups"
on page 58 for further information. You can also set up a drive for redundant
recording. See "Configuring redundant recording" on page 33.
After configuring your HDD settings, click
page, or
Previous
TruVision NVR 10 User Manual
to return to the previous page.
Previous
to return to the previous page.
Previous
to return to the previous page.
Initialize
and
Next
Chapter 3: Getting started
to move to the next
11