Checking Network Status - Interlogix TruVision 10 User Manual

Chapter 7: Network settings

Checking network status

You can easily check network traffic in order to obtain information about the NVR such
as its linking status, MTU, sending/receiving rate, MAC address, and NIC type.
The Net Detect page shows the network traffic between the TVN 10 and your local
network. However, the traffic between the plug and play cameras and the TVN 10 is not
shown.
You can also check the network connection status by testing its delay and packet loss.
To check network traffic:
1. From the menu toolbar, click
2. Click the Traffic
refreshed once a second.
To check network delay and packet loss:
1. From the menu toolbar, click
2. Select the Network Detection
3. Under the section "Network delay, Packet loss test", enter the destination address
and click Test.
The test result appears in a pop-up window.
4. If you need to check the current network parameters, click the
get an overview.
To check network statistics:
1. From the menu toolbar, click
2. Select the Network Stat.
54
System Settings
tab to display the Traffic window. The information displayed is
System Settings
tab.
System settings
tab.
> Net Detect
> Net Detect.
Network
> Net Detect.
TruVision NVR 10 User Manual
button to