Interlogix TruVision 10 User Manual page 40

Chapter 5: Recording settings
Note: You must set the storage mode of the HDD to Group before configuring
redundancy. See "Setting up HDD groups" on page 58 for more information.
To set up HDD redundancy:
1. Set which cameras will be recorded on which HDD.
From the menu toolbar, click
Under Mode, select Group.
Under Record on HDD
to be added to this group.
Note: By default, all channels belong to HDD group 1.
Click Apply to save the settings.
2. Set which HDD will be read/write (R/W) and which HDD will mirror the R/W HDD.
Click the HDD Information
click Edit. In the Local HDD Settings screen, select Redundancy. Verify at least
one other HDD is set to R/W.
Click Apply to save the settings and then
3. Click Back to return to live view.
34
System Settings
Group, select the HDD group number. Check the channels
tab and select the HDD to be used for redundancy and
OK
> Hard Disk > Storage
return to the previous screen.
TruVision NVR 10 User Manual
Mode.