Ftp Server Setup To Store Snapshots; Snmp Setup; Upnp Setup - Interlogix TruVision 10 User Manual

Chapter 7: Network settings

FTP server setup to store snapshots

You can upload your snapshots to an FTP server for storage.
Note: It is not possible to stream video to an FTP site.
To configure the FTP server settings:
1. From the menu toolbar, click
2. Check the Enable FTP
3. Enter the FTP server information: Server address, FTP port, user name, and
password.
4. Select the desire directory. The root directory is default.
5. Click Apply to save the settings.
6. Click Back to return to live view, or continue configuring the NVR settings.

SNMP setup

SNMP is a protocol for managing devices on networks. When you enable SNMP in the
menu, network management systems can retrieve NVR status information from the
NVR via SNMP.
When you set the trap address and trap port in the NVR menu to the network
management system's IP address and port number, and set up the network
management system as trap receiver, trap notifications (such as startup) are sent from
the NVR to the network management system.
Before configuring this function, you must first install the SNMP software.
To configure SNMP protocol settings:
1. From the menu toolbar, click
2. Check the Enable SNMP
3. Enter the required SNMP settings: SNMP version (V2 is default), SNMP port read
community, write community, trap address, and trap port.
4. Click Apply to save the settings.
5. Click Back to return to live view, or continue configuring the NVR settings.

UPnP setup

The NVR supports UPnP
automatically configure its own port forwarding, if this feature is also enabled in the
router.
You can select one of two methods to set up UPnP:
50
Network Settings
box.
Network Settings
box.
TM
(Universal Plug and Play). This feature lets the NVR
> FTP.
> SNMP.
TruVision NVR 10 User Manual